中文版  
 
easydrift,飘易环,安路中国
 
HOME
NEWS
EASYDRIFT
VIDEOS
USAGE
Certified
Instructor
Q & A
LINKS
CONTACT
SAFEROADS.CN
 
 
Fitting EASYDRIFT
    4-step installation
1、 Lay the wheel (rim + tire) on a flat surface- and check the total diameter is situated between 598 and 604mm.Deflate the tire by removing the valve.
2、 Place the EASYDRIFT ring on the tire, ready to move into position - At this point, the ring may seem too small to fit the tire completely.This is perfectly normal.
3 、Use a Vacuum or Venturi compressor tool-These tools are fitted to the end of the tire compressor hose, and are designed to remove all the air from a tire. As the air is removed, the ring will begin to slide down around the tire. As it moves into place, ensure the ring is fitted evenly aroung the tire. The ring should be fitted flush to the tire, with no overlap on one side or the other.
4 、Replace the tire valve- Once the ring is fitted, you're ready to inflate the tire- Ensure you inflate it to the manufacturer-recommended pressure. EASYDRIFT is now ready to be fitted on the vehicle - simply reattach the wheel to the vehicle.
飘易环,EASYDRIFT,苏华龙,安路中国 飘易环,EASYDRIFT,苏华龙,安路中国 飘易环,EASYDRIFT,苏华龙,安路中国
飘易环,EASYDRIFT,苏华龙,安路中国 飘易环,EASYDRIFT,苏华龙,安路中国 飘易环,EASYDRIFT,苏华龙,安路中国
 
 

©2011~2015 Saferoads.cn , All Rights Reserved Recomnended Resolution:1440*900